|
Who's Online
There currently are 5854 guests and 1 member online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
;
Excellent printing quality. A complete and very useful manual with all details.
;
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
;
Mi spiace per non poter scrivere in inglese... ma sono veramente soddisfatto del servizio offerto. Grazie..!!
;
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
DTR-6.6 FW UPGRADE
DSP/Video FW Upgrade 0. Unzip �firmware.zip� and store the unzipped folder & files and "Update.exe" as below. If you get the message like below, FW files are not properly stored. Check the path.
\Updater_SR803\Update.exe \firmware\SR803\fdist.fdf \FW803.dcf \DSP7803_05Y28A.s28 \05X04B_video803.hex You can name the uppermost folder "\Updater_SR803" as you like. 1. Hold down "Display" and then press "Standby" button to show Main version. 2. Press "Setup" within 3 seconds. 3. Press "Enter" while DSP version is shown to enter Setup mode. "DSP F/W Update" will be shown. 4. Connect your unit and PC with Flashwriter Jig and put the unit into Standby mode. 5. Double-click "Update.exe". Flashwriter Jig 0JFLASHEX
6. Click "DSP Updade" . DSP
PC (Personal computer)
0JFLASH
FFC
P702
RS232C
NAAR-8661
7. Update completes when Front Display stops showing the progress. Note: Even if you try to check the DSP version, you might not be able to get is due to the wrong combination of DSP and Main. In this case, check the version after upgrading Main FW.
Main FW Upgrade Write the latest main program using FlashSta.exe.
|
|
|
> |
|